Post 1 made on Thursday March 13, 2014 at 10:07 |
kneehead Lurking Member |
Joined: Posts: | August 2011 1 |
|
|
Because of the new "Smart Door openers" Touching the wires together no longer activates the doors. So the relay does not work. I read someone tried to solder to the back of an opener, but that was unsuccessful. Any Ideas?
|
Jeff |
|
Post 2 made on Thursday March 13, 2014 at 10:11 |
Glackowitz RC Moderator |
Joined: Posts: | May 2002 3,792 |
|
|
We interfaced with 6 doors recently on a job and had the same issue, found out the door openers required an interface from the manufacturer.
It allowed a contact closure to trigger the digital/proprietary signal.
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
Post 3 made on Friday March 14, 2014 at 09:18 |
Indigo Select Member |
Joined: Posts: | January 2008 2,040 |
|
|
Like Glack said. Got problem here as well. Got to talk to the vendor.
|
|
Post 4 made on Sunday March 16, 2014 at 12:10 |
ralliart329 Active Member |
Joined: Posts: | October 2007 655 |
|
|
What model or make door openers are you guys seeing this with?
Thankfully I haven't ran into it yet but would like to know what to look for so I can hopefully make the customer aware of it ahead of time
|
|
Post 5 made on Sunday March 16, 2014 at 13:16 |
Glackowitz RC Moderator |
Joined: Posts: | May 2002 3,792 |
|
|
Units we had to deal with were Overhead Door. Not sure on the models but the interface they finally got us were black boxes that took our contact closure in and sent their signal out. No power, no batteries, so we assumed it was powered on the 2 wires for control on the motor side
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.