| Post 1 made on Thursday March 6, 2014 at 10:00 |
barton Lurking Member |
Joined:
Posts: | February 2006
4 |
|
|
I have two RM-433s. When I attach one to my RP-6, after a while it gets hot to the touch. Not only the plastic part, but the metal antenna part. At that point, it pretty much stops responding to RF signals unless I hold the remote in a very specific way. If I swap out the RM-433 with a room-temperature one, it works again until that one gets hot. Does anyone have any clue what's going on?
|
|
| OP | Post 2 made on Friday March 7, 2014 at 09:00 |
barton Lurking Member |
Joined:
Posts: | February 2006
4 |
|
|
I swapped the RP-6 with another one and the RM-433 hasn't gotten hot yet.
|
|
| Post 3 made on Friday March 7, 2014 at 13:46 |
Ernie Gilman Yes, That Ernie! |
Joined:
Posts: | December 2001
30,104 |
|
|
Excellent troubleshooting. The RM-433 is not your problem.
|
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
