I am looking for discreate codes to set the video input (ie composite, video, pc). The RTI library hidden codes for on and off work fine. Any help would be appreciated.

RS232 is the only way to get discrete access to the different sources and other functions
I am not sure why there is not an RS 232 Forum or section under “Files” at remote central or RTICorp, but there should be.

Here are the codes you will need.

Enjoy,

David

PANASONIC PLASMA RS 232 CODES FOR RTI

With power off, this plasma display will only respond to the PON command.

Power On= \x02PON\x03
Power Off= \x02POF\x03

Volume = \x02AVL:**\x03 Where ** is Enter-Value between 00 and 63

Audio Mute Off= \x02AMT:0\x03
Audio Mute On= \x02AMT:1\x03


Input Select Toggle= \x02IIS\x03
AV Mode= \x02IIS:VID\x03
Component/RGB Mode= \x02IIS:YP1\x03
{Processed as a Y/Pb/Pr or RGB Signal as set by this unit}
PC Mode= \x02IIS:RG1\x03

{Screen Mode}
Normal= \x02DAM:NORM\x03
Zoom= \x02DAM:ZOOM\x03
Full= \x02DAM:FULL\x03
Just= \x02DAM:JUST\x03
Auto= \x02DAM:SELF\x03


Baud Rate= 9600 BPS
NO Parity
Char length= 8Bits
Stop bit = 1Bit

The codes you are looking for are available for the current generation of Panasonic plasma. Check the Pronto forum, you can import them to the T2 from there.
BTW, not all of the input commands are available, but there should be enough to get you by.

jcmitch

the work around for getting to the input is to create a macro which includes
Channel +or- this takes plasma out of current input and moves it to tuner input. from there simply add the required presses of the scrolling input until you get to the input you desire. It works well.