| Post 1 made on Monday September 16, 2002 at 04:38 |
Spaceman Founding Member |
Joined:
Posts: | October 2001
58 |
|
|
Hi all,
I have a Yamaha RX-V1200 receiver and I wonder if I
can connect the IRF6 to the receivers ir input instead of using an ir-emitter?
I guess that it will work I just want to be sure!
|
|
| Post 2 made on Thursday June 12, 2003 at 11:55 |
dertah Founding Member |
Joined:
Posts: | February 2002
5 |
|
|
I do this with my LExicon MC-1. I had to turn the IR level way down though.
|
|
| Post 3 made on Friday June 13, 2003 at 07:13 |
Cougmeister Long Time Member |
|
|
Yes, it is supposed to work. In some instances you may need to use a Xantech interface module, depending on the characteristics of the device.
I have tried to do this with an Arcam DVD, and even with the interface have not yet been successful.
If you need an interface, you can call Xantech tech support or Kevin at RTI tech support for the Xantech model number. In most instances it will be the 794 block and the cables out such as 3.5 mm or RCA plug will need to be specified. Xantech's website will tell you what cables are supplied with each model
|
|
| Post 4 made on Friday June 13, 2003 at 07:15 |
Cougmeister Long Time Member |
|
|
Spaceman,
I just looked back and found your post to be dated 9/16/02. Just a litlle late, I am... Sorry.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
