 |
 |
|
|
RTI Control Systems Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Shaw Gateway Portal mp2000na Remote...
| |
|
| Topic: | Shaw Gateway Portal mp2000na Remote codes *Solved* This thread has 40 replies. Displaying posts 1 through 15. |
|
| Post 1 made on Tuesday November 8, 2011 at 16:34 |
Has anyone got a tried and true working IR codes for the Shaw Gateway system?? I've tried the Moxi codes and tried learning then from the remote. Problem is that when your in the guild and try to move up or down, it double skips lines. If you change the file to 0 repeats and no sustain. it will work but is really slow. one press at a time just to move up or down a line. would be nice to be able to hold the up or down and fly through the guild, and when you press up or down once it moves once! Help
Last edited by Wolfer14 on February 23, 2012 15:51.
|
|
| Post 2 made on Sunday November 20, 2011 at 15:39 |
Scooper Founding Member |
Joined:
Posts: | March 2002
319 |
|
|
We are having the same issues, it is so important to find a solution for this. Apparently it is a known issue with RTI and Shaw but have no idea if there is a solution on the horizion. I know I am swearing , but Harmony remotes and codes work flawlessly on there Shaw Gateway cable boxes.
Any ideas or news anyone?
|
|
| Post 3 made on Tuesday November 22, 2011 at 16:01 |
walljordan Lurking Member |
Joined:
Posts: | November 2011
2 |
|
|
I have the same issue. Not just with RTI. Also with Elan's g! and Universal. I have e-mailed both Moxi and Arris about it. I suspect that there may be two IR codes toggling. I sure hope not.
If I hear back from the manufacturer I will pass it along.
|
|
| Post 4 made on Wednesday November 23, 2011 at 19:22 |
edselrt Lurking Member |
Joined:
Posts: | October 2009
3 |
|
|
any update on the Shaw gateway portal IR codes?
|
|
| Post 5 made on Thursday November 24, 2011 at 11:12 |
walljordan Lurking Member |
Joined:
Posts: | November 2011
2 |
|
|
Still haven't heard a thing from Arris or Moxi. E-mails, phone calls, carrier pigeon; all falling on deaf ears.
|
|
| Post 6 made on Tuesday November 29, 2011 at 10:09 |
edselrt Lurking Member |
Joined:
Posts: | October 2009
3 |
|
|
Try Digeo codesets. It worked for me!
|
|
| Post 7 made on Sunday December 4, 2011 at 14:35 |
I do not see digeo in the Megalist 21... nor can I find the codesets by search... can you give me a link to find the codeset?
|
|
| Post 8 made on Sunday December 4, 2011 at 16:53 |
Scooper Founding Member |
Joined:
Posts: | March 2002
319 |
|
|
me to....we are despstate to make these boxes work withour thr double channel advance and at same channel up/down speed as original remote
thanks in advance
|
|
| Post 9 made on Monday December 5, 2011 at 00:34 |
Cdn Weasel Long Time Member |
Joined:
Posts: | July 2009
143 |
|
|
I've captured the codes and they work fine for me
|
|
| Post 10 made on Monday December 5, 2011 at 10:30 |
Scooper Founding Member |
Joined:
Posts: | March 2002
319 |
|
|
The trouble we are having, is when we capture the codes and load it it a RTI T2c program and into a remote, it works , however on channel up or down , or guide up or down ,it skips two spaces ie channel 201 to channel 203, instead of 202. The first executed channel up works correctly, the second button press goes two spots up (and have heard from other programmers same issue),
|
|
| Post 11 made on Monday December 5, 2011 at 15:44 |
Cdn Weasel Long Time Member |
Joined:
Posts: | July 2009
143 |
|
|
That's really weird. I just did a xp-6 t2c set up last week and didn't have that issue. Could be different firmware up here in Canada on our Arris boxes
|
|
| Post 12 made on Monday December 5, 2011 at 21:42 |
Scooper Founding Member |
Joined:
Posts: | March 2002
319 |
|
|
Scoop here....
I am in Canada too, we cannot get it to work correctly and either can distributor. can u send me info, file, codes whatever u feel comfortanle with......
archav at shaw dot ca
ill owe u one
|
|
| Post 13 made on Tuesday December 6, 2011 at 21:51 |
Cams Long Time Member |
Joined:
Posts: | January 2006
485 |
|
|
Not sure on what shaw is, but it looks like it might be using two IR codes? From within ID did you try the "toggle IR code" ? WHen you create a marco its under the command list.
I think we had this issue once before when using IR from windows media center - it would always skip two..
|
|
| Post 14 made on Friday December 9, 2011 at 10:40 |
paucoin87 Long Time Member |
Joined:
Posts: | January 2009
13 |
|
|
We had the same issue with Shaw on the g! system, if you crank the preamble back as far as it goes (removing the white box around each HEX bar) it worked flawlessly, not sure if it will work for Gateway but we are currently programming a system so I'll see if that works.
|
|
| Post 15 made on Saturday December 10, 2011 at 12:57 |
Scooper Founding Member |
Joined:
Posts: | March 2002
319 |
|
|
paucoin87,keep us posted.
I loaded the Diago 1 codeset in the URC ir data base in an MX850 and codes worked flawlesly, Harmony I understand works flawlessly on Shaw Arris box too.
What up with RTI having issues?
Anyone know if I can get the hex codes from the Diago 1 codes from a MX850 and load them in RTI hex input?
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
