Hi there!

After leaving the Pronto Family (forced!!) we are now going RTI and want to push this as far and solid as we did the Pronto series.

Thus far we are working on a bi-directional KNX/EIB script which will work with our inexpensive KNiX Port (which also supports iPad/iPhone with our free iKNiX App available at the app store) as well as the ARC card for RTI and, of course, our smarTemp, which is an inexpensive IP thermometer.

We'll keep you posted and try to keep it rocking!!

Hey buddy

how you doing? any chance we could expect RTI+adagio integration as well?

We'll give it some serious consideration...

Keep tuned!!

When is the RTI driver available?

I would like to see if this works better than the comm-tec.
The only thing is that 250 adresses is not to much 400 would be better..

2 weeks.

Hi to everyone and Happy New Year!

For all of you who have a chance to come to this year's ISE in Amsterdam, check us out at booth 7V197 (the KNX booth).

We will be showcasing our latest RTI to KNX driver (with our KNiX Port V2 for 250 group addresses and V3 for 1.000 group addresses) as well as our iOS integration and - brandnew - Android App!

We will have a cool entertainment setup (Kaleidescape/Denon/Panasonic/Sonos) where we will show you how to use a KNX switch to control your Kaleidescape/Denon/Panasonic/Sonos!!

We have written a Panasonic consumer line driver for the VT20 and VT30 series and will probably give this away for free.

AND WE ARE ALSO CLOSE TO FINIISHING OUR FAMOUS ADAGIO DRIVER - lets see if we get this done by the end of the month - but it will kick butt!!

Hope to see you there and

Keep it rocking!

We prefer the active surroundings driver, it uses any cheap KNX gateway and does not need the expensice KNIX device.