Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Anyone else's LCD just quit?
This thread has 1 response. Displaying all posts.
Post 1 made on Wednesday May 29, 2002 at 21:17
dwb
Founding Member
Joined:
Posts:
April 2002
2
Is there a quick fix or is this a service item?
Post 2 made on Sunday June 2, 2002 at 00:27
RTI Installer
Super Member
Joined:
Posts:
March 2002
3,320
Remove the six small screws on the back pull off the face plate at the bottom right of the lcd display are {depending on what release you have} two small metal tags or two small black wires which are soldered on to the contact switch board, make sure these have not broke loose. Something else you might try putting pressure on the right side of the display and see if the screen goes on and off, if this is the case you can probably stick a folded piece of paper between the case and the right side of the screen. if this does not fix it send it to RTI and Pray for a quick turn around.
Never Ignore the Obvious -- H. David Gray

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse