Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Importing Pronto ccf files
This thread has 4 replies. Displaying all posts.
Post 1 made on Saturday January 12, 2002 at 14:50
markhas
Founding Member
Joined:
Posts:
January 2002
3
I would like to import a Pronto IR library for my Electrohome Marquee projector. I have heard that this is possible by using the F12 key somewhere in the IR Manager. I have only found a window where I can enter the RAW IR codes. I could do this, but I don't know how to get the codes out of the ccf file. Is there some other way to do this?
Post 2 made on Saturday January 12, 2002 at 15:10
Anthony
Ultimate Member
Joined:
Posts:
May 2001
28,867
You need to install ProntoEdit on your PC. then go to the buttons you need and dblclk them to get to the action list. after that it depends on the version of software to get to the IR codes (all CCFs have a code beside them for what remote they were designed for. use the appropriate editor)
...
OP | Post 3 made on Sunday January 20, 2002 at 18:57
markhas
Founding Member
Joined:
Posts:
January 2002
3
I don't know what you mean by "a code beside them." I downloaded ProntoEdit 2.0 and it is able to read the Electrohome ccf file. However the action list for the file only shows an odd looking code that is not HEX.

I decompiled the ccf to a csf which I am able to read. Is the RawCode what I am looking for? It did not seem to work.

CSF for "On" Button:

Button("On",166,2,36,24,2) /* Button 2 : Macrogroup : "Electrohome" Panel : "Marquee/Vidikron" */
{
ActiveUnselectedIcon("Electrohome Universal_bmp\icon0000.bmp");
ActiveSelectedIcon("Electrohome Universal_bmp\icon0001.bmp");

Action()
{
RawCode("7","0000 000c 000e 0007 0084 0318 0084 0084 0108 0084 0084 0084 0084 0084 0084 0084 0084 33de 0084 0318 0084 0084 0084 0084 0084 0084 0108 0084 0084 0084 0084 33de 0084 0318 0084 0084 0084 0084 0084 0084 0108 0084 0084 0084 0084 33de");
}
}


Electrohome ccf:
[Link: remotecentral.com]

Post 4 made on Monday January 21, 2002 at 09:09
Anthony
Ultimate Member
Joined:
Posts:
May 2001
28,867
This is the IR code

0000 000c 000e 0007 0084 0318 0084 0084 0108 0084 0084 0084 0084 0084 0084 0084 0084 33de 0084 0318 0084 0084 0084 0084 0084 0084 0108 0084 0084 0084 0084 33de 0084 0318 0084 0084 0084 0084 0084 0084 0108 0084 0084 0084 0084 33de

On the page you are linking to, you will notice underneath the equipments name you will find
Remote: Unknown (P1)

Unknown is the original remote model
P1 stands for Pronto TSU-1000

M1 = Marantz RC5000 1mb
M2 = Marantz RC5000 2mb
M5 = Marantz RC5200 2mb
M9 = Marantz RC9200 8mb
O2 = Onkyo CHAD 2mb
P1 = Pronto TS-1000 or RU890 1mb
P2 = Pronto TSU2000 or RU940 2mb
PP = ProntoPro TSU6000 8mb
Y2 = Yamaha RAV-2000 2mb


...
OP | Post 5 made on Monday January 21, 2002 at 20:28
markhas
Founding Member
Joined:
Posts:
January 2002
3
Thanks a bunch. I gave up trying to convert the ccf over the weekend since the code I entered didn't work. So I captured the IR codes manually which works for the most part. It is a bit twitchy, but once successful all is well. The odd thing is that the ccf says their codes are transmitted at 336 kHz, but the T2 captures them at 333.3kHz.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse