Post 1 made on Tuesday March 16, 2010 at 13:09 |
Jimmy Bellagio Advanced Member |
Joined: Posts: | January 2008 854 |
|
|
Can you give a customer a one way remote to use with a ZRP5 or ZRP6 with an RM-433? Do you need the zigbee antenna even though your only using a one way remote to communicate one way? Would like to provide the processor for future upgradability and wondering what I need now vs. later. I know you need it for a 2-way remote regardless of if you are only using it one way, but what about a one way remote?
Thanks
|
James S. Bellagio |
|
Post 2 made on Tuesday March 16, 2010 at 13:51 |
drewski300 Super Member |
Joined: Posts: | January 2007 3,849 |
|
|
Both the ZRP5 and ZRP6 have the ability to hook up a RM433 antenna and a zigbee antenna. So you can use standard RF with either one but you'll have to purchase it seperately. Just keep in mind if you have a zigbee remote it will not output RF and vice versa.
On a side note, be leery about the ZRP6 and two-way. It is very limited and make sure you are aware of what it can do before you make promises.
|
"Just when I thought you couldn't possibly be any dumber, you go and do something like this... and totally redeem yourself!" |
|
Post 3 made on Tuesday March 16, 2010 at 22:48 |
brucewayne Advanced Member |
Joined: Posts: | March 2006 895 |
|
|
Drewski is rite the two is limited .i would use an xp-8 if the buget permits their more driver and ip control .if your think of the future ip control is some thing to think about . is the zrp5 out yet?
|
brucewayne |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.