Programmed an RK-3 yesterday and noticed I could page link in the macro.

I would love to have the same thing on a t3-V... caused by different delays depending on flag situation

Projector allready on = no delay
Projector warming up= 30 sec delay before page jump

I just hate it when the customer wants to press on a station logo while macro is still in delay...

Anyone have a solution?

Didn't you just answer your own question?

Flag test - if flag "Projector is ON"
        - then page jump
        ELSE
        - delay 30 seconds
        - then page jump

or for a "cleaner" version (not that it matters)

Flag test - if flag "Projector is OFF"
         - delay 30 seconds
         ELSE
         - n/a [leave blank]
Page jump

you need to put your button in standalone mode. I'm pretty sure it doesn't show up as a feature if it's not in standalone mode.

I forgot to write T3V/Rp1, my mistake
The delay is in the Rp1, the page jump does not reflect the delay

you have to figure out the delay and put it in yourself on the T3V there is no two way communciation

What he said.