|
|
|
RTI Control Systems Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Good SiriusXM tuner? This thread has 18 replies. Displaying posts 16 through 19. |
|
Post 16 made on Thursday March 11, 2010 at 17:24 |
remotecollector Long Time Member |
Joined: Posts: | January 2006 140 |
|
|
Yes, the old Polk sirius tuner uses the same IR codes as the SCH2P and the new SRH2000. I can send you known IR codes in a document if you need. The adaptor cable that came in the box is to convert the old non-standard IR input connector to standard 2 conductor IR systems such as Niles, URC, RTI, etc. The 3 position switch on the back must be set for IR control.
|
|
OP | Post 17 made on Friday March 12, 2010 at 00:20 |
Benford AV Active Member |
Joined: Posts: | August 2007 714 |
|
|
Well first let me say I'm sorry I put this in the RTI forum, I know this is not an RTI issue.
Second I should thank everybody for the help, especially A^@D. I have received a couple emails from reps that lurk in these forums and my own sales rep mentioned it to me today on the phone while I was placing another order.
Now back to the issue, I have tried the codes listed above which are also the same codes Glack emailed me (thanks), and they did not work. Is there anyway I can start the process of elimination?
My problem could potentially be the following: Incorrect codes improper "learning" of the codes from the RTI M2 into the Niles ZR8630 the 1/8" mono cable connected from the ZR8630 to the SCH2P the Niles ZR8630 may have a problem the Sirius SCH2P may have a problem
I think I will take a RP1 to the job and try sending the commands from the RP1 to the SCH2P. This will confirm the correct codes, test the cable, and may point me to the Niles. I will also try learning the codes at different distances from the IR receiver on the ZR8630.
|
The Soundwave www.the-soundwave.comB&W, Classe', Rotel, Paradigm, Integra, Denon, Audioquest, RTI, Niles, Pioneer Elite, Bell'O |
|
Post 18 made on Friday March 12, 2010 at 01:04 |
Glackowitz RC Moderator |
Joined: Posts: | May 2002 3,793 |
|
|
The SCH2P IR in has a stereo jack on it
Tip is not used, Ring is signal. sleeve is ground
Pretty sure thats what I read in another post
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
Post 19 made on Friday March 12, 2010 at 09:15 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,299 |
|
|
On March 12, 2010 at 01:04, Glackowitz said...
The SCH2P IR in has a stereo jack on it
Tip is not used, Ring is signal. sleeve is ground
Pretty sure thats what I read in another post an adapter comes with the unit to connect it to a standard mono plug.
|
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|