Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
T3 Sub menu?
This thread has 7 replies. Displaying all posts.
Post 1 made on Friday January 15, 2010 at 16:59
Conductor
Lurking Member
Joined:
Posts:
July 2009
2
I'm looking for help on how to get into the sub menu for my T3. I want to be able to turn off or adjust the sensitivity of the tilt feature for it repeatedly lights up when lying on it's back. When the remote originally comes out of the box it has a button to be able to get into the sub menu but through programming that button is gone and I can't seem to locate it in the command library.
Thanks for any help.
Post 2 made on Friday January 15, 2010 at 17:12
jimstolz76
Loyal Member
Joined:
Posts:
December 2007
5,607
turn the remote off, hold your finger on the screen while switching it on.  It will boot up to the Control Panel.

At least thats how the other remotes do it - haven't done a T3.
OP | Post 3 made on Friday January 15, 2010 at 17:20
Conductor
Lurking Member
Joined:
Posts:
July 2009
2
Thanks jimstolz76
Holding the screen wasn't the answer but I tried it while holding the Home button and it came up.
Thanks again!!
Post 4 made on Friday January 15, 2010 at 21:49
anyhomeneeds
Super Member
Joined:
Posts:
December 2007
4,149
YOu could also have the programmer put that feature on a button somewhere.
"You can't fix stupid."
Post 5 made on Saturday January 16, 2010 at 22:08
thecapnredfish
Senior Member
Joined:
Posts:
February 2008
1,397
Create a small transparent button assigned to control panel . I usually do this in very top corner of home page. Or don't, looks like you have a way. Now if someone new the buttons to press to get into the service menu??????. RTI had me do this for a t2+, had some good info in there related to battery.
Post 6 made on Saturday January 16, 2010 at 22:50
SDZD
Senior Member
Joined:
Posts:
October 2003
1,082
On January 15, 2010 at 17:12, jimstolz76 said...
turn the remote off, hold your finger on the screen while switching it on. It will boot up to the Control Panel.

At least thats how the other remotes do it - haven't done a T3.

Your thinking AMX
Post 7 made on Saturday January 16, 2010 at 23:54
anyhomeneeds
Super Member
Joined:
Posts:
December 2007
4,149
On January 16, 2010 at 22:50, SDZD said...
Your thinking AMX

If it's AMX, you should be charging for tech support.
"You can't fix stupid."
Post 8 made on Wednesday January 20, 2010 at 23:10
SAAudio
Advanced Member
Joined:
Posts:
March 2007
993
On January 16, 2010 at 22:50, SDZD said...
Your thinking AMX

No, most if not all, RTI remotes and keypads will boot the the control panel with this method.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse