Post 1 made on Monday November 26, 2001 at 11:26 |
will Founding Member |
Joined: Posts: | November 2001 10 |
|
|
I need a second IFR-6 device. If anyone is looking to sell one please let me know. Thanks.
Will
|
|
Post 2 made on Wednesday November 28, 2001 at 08:57 |
Rob Grabon Founding Member |
Joined: Posts: | November 2001 1,392 |
|
|
If you need a second to expand an existing you can run the output from one of the ports into a xantech blcok.
|
Technology is cheap, Time is expensive. |
|
OP | Post 3 made on Wednesday November 28, 2001 at 11:34 |
will Founding Member |
Joined: Posts: | November 2001 10 |
|
|
Really? Can you explain this a little more?
|
|
Post 4 made on Monday December 3, 2001 at 09:04 |
Rob Grabon Founding Member |
Joined: Posts: | November 2001 1,392 |
|
|
Run a cable from a port on the irf6 with the center conductor connected to the signal jack of the Xantechm block and the sheild wire connected to ground. Done.
|
Technology is cheap, Time is expensive. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.