Post 1 made on Monday November 12, 2001 at 10:39 |
rickp Founding Member |
Joined: Posts: | October 2001 255 |
|
|
I just put the NR in my system and the first few attempts to get the codes from it to my RTI did not work. Only the on sequence. Any help will help. Thanks, Rick
|
|
OP | Post 2 made on Friday November 16, 2001 at 09:24 |
rickp Founding Member |
Joined: Posts: | October 2001 255 |
|
|
I finally did get what I needed by a combination of using the NR flasher/teach and its remote to teach both my RTI and an SL 9000. What a mix! I suppose my talents at collecting IR signals has rusted a bit as well. It does not help things at all when the RTI indicates it learned the code when in fact it did not. I am also having trouble getting the 'Test' system to work repeatedly.
This message was edited by rickp on 11/16/01 09:26.02.
|
|
Post 3 made on Friday February 1, 2002 at 11:53 |
soundsations Founding Member |
Joined: Posts: | February 2002 1 |
|
|
Were you able to get the discrete codes for the inputs? I have a client with a NRS and tried programming the RTI with discrete inputs...but all it does is toggle the inputs...no good. It says to enter 'INPUT' then the '#' but when I do that it only toggles. I tried to program to SL9000 also...how were you able to get discrete inputs? Any help appreciated. Thanks.
|
|
OP | Post 4 made on Friday February 1, 2002 at 19:23 |
rickp Founding Member |
Joined: Posts: | October 2001 255 |
|
|
I do access any input directly, 1 thru 5. What is working for me is set the repeat for the 'input' signal to 2 or 3, put in a .2 or .3 second dwell, then the number, which I set to repeat from 2 - 5 times. I am in the RF mode and don't know if that changes anything for you. Good luck. Rick
|
|
Post 5 made on Saturday July 20, 2002 at 21:49 |
I have the NR in a few systems, I have over come the inputs. I could e-mail it if you'd like.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.