|
|
|
RTI Control Systems Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
RTI and AMX Matrix Mi series
| |
|
Topic: | RTI and AMX Matrix Mi series This thread has 6 replies. Displaying all posts. |
|
Post 1 made on Tuesday December 1, 2009 at 14:25 |
AZ1 Long Time Member |
Joined: Posts: | February 2008 73 |
|
|
I am new to RTI and i have a T3-V and a T4 on there way so i can learn how to program them. I have used nevo and pronto and universal remotes so im not new to programing. My ? is has anyone used a RTI remote with a AMX Matrix Mi series house audio controller? AMX is installed right now but the homeowners hate it and wanna try something new. I want to be able to turn on individual zones and have a party mode to turn on all zones. Is this possible i guess is my real ?. Thanks David
|
|
Post 2 made on Tuesday December 1, 2009 at 18:14 |
I have used RTI as the remote for AMX systems several times. There are a few ways to do it. #1 get a AMX RF receiver 433mhz (Good way) #1 Put in an RP6 and a cm232 or whatever the RTI part number is for a 232 adaptor and run the 232 to AMX then get or right an AMX module to do what ever you want when it receives 232 info. #3 Get a AMX TCC television controller with an IR receiver and have the RTI RP6 or Rp1 spit out AMX IR commands
All this requires you to program AMX as well
But I must say the RTI/AMX combo rocks if it done right
|
|
Post 3 made on Friday December 4, 2009 at 01:08 |
cdouglass Long Time Member |
Joined: Posts: | February 2008 166 |
|
|
Can you elaborate what they hate about it? Is it the keypads or maybe a touchpanel?
If there isn't a central controller then you could just send RS-232 or IR commands directly to the house audio unit with RTI.
|
|
OP | Post 4 made on Tuesday December 8, 2009 at 17:12 |
AZ1 Long Time Member |
Joined: Posts: | February 2008 73 |
|
|
They hate the touchpanels because they are heavy and hard to dock. They wanted them because they had crestron at the other house and figured they would like the panels. So basically my question is if i take out the entire amx system and use the xp8 and t3-v, could i program this remote to show status in everyroom, vol, source, and then make a party button which turns on all zones and work the vol as one. it will be hooked up rs-232.
|
|
Post 5 made on Tuesday December 8, 2009 at 20:24 |
cdouglass Long Time Member |
Joined: Posts: | February 2008 166 |
|
|
Not unless RTI makes a 2-way driver, but you can still do one way control just like the AMX system.
|
|
Post 6 made on Tuesday December 8, 2009 at 20:39 |
cdouglass Long Time Member |
Joined: Posts: | February 2008 166 |
|
|
btw, if that's the only complaints they have and everything works perfectly fine I would think that it would be an injustice to have them switch over to something else. Not sure what panels are installed but AMX has much to choose from.
Perhaps they should inquire about trading them in for a smaller size. I know that you won't make any money but you might be setting your client up for disappointment.
Just my 2 cents, good luck.
|
|
OP | Post 7 made on Wednesday December 9, 2009 at 15:40 |
AZ1 Long Time Member |
Joined: Posts: | February 2008 73 |
|
|
The goal was to let them have both if possible, and let them decide if they liked it or not.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|