Had a 433 Mhz T4 and an RP-6. Was changing over to an XP-8 and eliminating the RP-6. Converted everything over in programming, changed the T4 checkbox to "has 2.0 or higher firmware installed". Keep in mind this is 6pm and I'm trying to run out the door...
Went to download program into T4 when I get an error that I have to update to firmware 2.0. OK, forgot to do that. Ran the T4 2.1 update and it ran without a hitch. (I had already done the 2.1 update on the XP-8). Downloaded the program into the T4 and XP-8. Hit a couple buttons and nothin'. Nothing at all. The activity light on the RM433 barely flickered for a second but other than that I got NO activity on it at all. It's wired to the XP-8 correctly and I checked and I have 12v on the screw terminals.
So I knocked out all the equipment at our office until I can get back there tomorrow at about noon. Great.
Any input on what I may have done wrong? I didn't have time to really get into loading different program files, or swapping the RM433, or hooking it back to the RP-6, etc. Just wondering if anyone has seen anything simliar.
WTF is right. - - Holiday parties, etc. are coming and you know that a possibility exists that a phone call(s) may come due to equipment issues. Their product failure rate and inconsistent operation is way too high for the prices we pay.
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
