|
|
 |
|
The following page was printed from RemoteCentral.com:
|
ID 7.1 and New 2 Way Firmware released.
| |
|
| Topic: | ID 7.1 and New 2 Way Firmware released. This thread has 23 replies. Displaying posts 1 through 15. |
|
| Post 1 made on Friday November 6, 2009 at 19:46 |
tabascojunkie Long Time Member |
Joined:
Posts: | July 2007
255 |
|
|
Two Way Beeps and wakeup hardwired keypds. They listened!! (yea!)
ENHANCEMENTS AND FEATURES
This version of Integration Designer adds:
Updated RS-232 and IR libraries
Support for new features added in firmware version 2.1 for the XP-8, T2-C, T3-V, T4, RK3 and K4: Two-way beep triggers, wakeup hardwired keypads on page changes, scrolling text, RK3 system variable power LED control, support for using local flags as system variables, and support for RS-485 communications on the XP-8, RK3 and K4.
Updated Weather driver with animated Radar images (Requires firmware version 2.1 for XP-8 and RK3/K4/T3-V/T4)
Support for the ZRP-6 and MRP-64 control processors
Support for the PCM-8 port control module
Miscellaneous bug fixes & performance improvements
|
|
| Post 2 made on Friday November 6, 2009 at 20:08 |
jimstolz76 Loyal Member |
Joined:
Posts: | December 2007
5,607 |
|
|
local flags as system variables!!!!!!!!!!!
|
|
|
| Post 3 made on Friday November 6, 2009 at 20:27 |
motech Super Member |
Joined:
Posts: | August 2008
3,374 |
|
|
|
| Post 4 made on Friday November 6, 2009 at 20:34 |
motech Super Member |
Joined:
Posts: | August 2008
3,374 |
|
|
no built in updated in ID?
i have to manually download it and install it?
|
|
|
| Post 5 made on Friday November 6, 2009 at 20:35 |
jimstolz76 Loyal Member |
Joined:
Posts: | December 2007
5,607 |
|
|
already found something... T2-Cs has an option for firmware 2.0, but they don't have a firmware update available for it. When you select it, it does grey out the Two-Way trigger codes option from the Output tab. If they're going to release a 2.0 for the T2-Cs, it looks like you'll be able to use the local flags as variables which is flippin sweet. :)
Also, looks like you can't use driver/sense events on the ZRP-6, which kinda sucks, but I'm still excited.
|
|
|
| Post 6 made on Friday November 6, 2009 at 20:47 |
jimstolz76 Loyal Member |
Joined:
Posts: | December 2007
5,607 |
|
|
On November 6, 2009 at 20:34, motech said...
no built in updated in ID?
i have to manually download it and install it? you just download a patch Also, it says the Weather 1.1 driver is included in ID 7.1. If you have the Weather driver in a file, it will stay at 1.0. You have to add another Weather driver to get 1.1. Edit - and no IP control on the ZRP-6 or MRP-64. You can program over the network, but no device control or feedback through it...
Last edited by jimstolz76 on November 6, 2009 21:27.
|
|
|
| Post 7 made on Friday November 6, 2009 at 22:29 |
gadgetman2010 Lurking Member |
Joined:
Posts: | November 2009
9 |
|
|
Just went on their site and they still have 7.01. I have a new ZRP-6 that arrived yesterday and I'm anxiously awaiting the new ID software. Any suggestions....
Thanks,
Eric
|
|
| Post 8 made on Friday November 6, 2009 at 22:51 |
jimstolz76 Loyal Member |
Joined:
Posts: | December 2007
5,607 |
|
|
On November 6, 2009 at 22:29, gadgetman2010 said...
Just went on their site and they still have 7.01. I have a new ZRP-6 that arrived yesterday and I'm anxiously awaiting the new ID software. Any suggestions....
Thanks,
Eric Yeah clear your internet cache or hit refresh... I've been playing with it off and on for hours...
|
|
|
| Post 9 made on Friday November 6, 2009 at 23:23 |
gadgetman2010 Lurking Member |
Joined:
Posts: | November 2009
9 |
|
|
On November 6, 2009 at 22:51, jimstolz76 said...
Yeah clear your internet cache or hit refresh... I've been playing with it off and on for hours... That did the trick...thanks
|
|
| Post 10 made on Saturday November 7, 2009 at 08:36 |
markrubin Founding Member |
Joined:
Posts: | February 2002
919 |
|
|
I cannot seem to upgrade my XP-8 after I reset it as part of the upgrade, it just locks up disconnecting the USB cable reboots it the installer program never goes to next I know the XP-8 is communicating with PC (able to download firmware version)
Last edited by markrubin on November 7, 2009 08:49.
|
|
| Post 11 made on Saturday November 7, 2009 at 10:16 |
rtiuser Long Time Member |
Joined:
Posts: | August 2009
99 |
|
|
On November 7, 2009 at 08:36, markrubin said...
I cannot seem to upgrade my XP-8
after I reset it as part of the upgrade, it just locks up
disconnecting the USB cable reboots it
the installer program never goes to next
I know the XP-8 is communicating with PC (able to download firmware version) I had the same problem... Try this: Follow instructions. Disconnect USB Reconnect USB Close upgrade utility Launch Utility and click Next
|
|
| Post 12 made on Saturday November 7, 2009 at 12:18 |
markrubin Founding Member |
Joined:
Posts: | February 2002
919 |
|
|
On November 7, 2009 at 10:16, rtiuser said...
I had the same problem... Try this:
Follow instructions.
Disconnect USB
Reconnect USB
Close upgrade utility
Launch Utility and click Next no good on that either two frigging hours trying to update an XP8 and no progress wake up RTI
|
|
| Post 13 made on Saturday November 7, 2009 at 12:56 |
jimstolz76 Loyal Member |
Joined:
Posts: | December 2007
5,607 |
|
|
Same thing upgrading to 2.0. If it doesn't go on the first try, disconnect the cable, close the utility, and start over. I wasted about 30 minutes trying again and again and again without going through all the motions. Hopefully that's all it is.
|
|
|
| Post 14 made on Saturday November 7, 2009 at 13:13 |
rtiuser Long Time Member |
Joined:
Posts: | August 2009
99 |
|
|
On November 7, 2009 at 12:18, markrubin said...
no good on that either
two frigging hours trying to update an XP8 and no progress
wake up RTI It worked on my XP-8 but my K-4 refused to upgrade with my laptop. Worked just fine from my desktop. Both runing vista 32bit. I'm going to have a frustrating Monday with 10 K-4's to update.
|
|
| Post 15 made on Saturday November 7, 2009 at 18:39 |
Benford AV Active Member |
Joined:
Posts: | August 2007
714 |
|
|
What about the RK3-V?
Is it in ID7.1? Shipping?
|
The Soundwave www.the-soundwave.comB&W, Classe', Rotel, Paradigm, Integra, Denon, Audioquest, RTI, Niles, Pioneer Elite, Bell'O |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
