Post 1 made on Thursday October 15, 2009 at 20:06 |
Homerun Long Time Member |
Joined: Posts: | January 2004 111 |
|
|
Was working on upgrading a customer to 2 way control today as well as adding one 2.4 T4 and zigbee. I had the zigbee and 433 controls working together for a couple weeks on newest firm ware, the only thing I changed today was setting in walls to 2 way control and connecting to network Via Ethernet port now the T-1's in the system will not trigger any system macros or ir commands. RM-433 green light is flashing but no ir output. All in walls and T4 are working fine.
System: 1 XP8 3 K4's 2 CB4's 2 RK3's 1 T4 7 T1's 1 RM-433 1 ZM-24
|
|
Post 2 made on Thursday October 15, 2009 at 23:30 |
RTI Installer Super Member |
Joined: Posts: | March 2002 3,320 |
|
|
Have you installed any two way drivers that are not set up. meaning they are not assigned specifically to a serial ip port. If you have a driver that defaults to a serial port for example like denon receiver drivers default to serial port 1, and then you plug something like a tuner into that port, you can get sporadic malfunctions, Further, Ip conflicts can cause K4's RK3's and Xp8's to behave badly.
You said- "in walls to 2 way control and connecting to network Via Ethernet port "
I would recheck your IP settings especially the XP8 and then do a reset on the XP8 by pressing the button on the front panel
|
Never Ignore the Obvious -- H. David Gray |
|
OP | Post 3 made on Friday October 16, 2009 at 10:04 |
Homerun Long Time Member |
Joined: Posts: | January 2004 111 |
|
|
I have not installed any 2-way drivers yet, the only thing I was going for was enabling page flips on in wall controls and getting the 2 way ready for an I port install next week. I have no IP conflicts as all of the K4's and RK3's are behaving.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.