Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Sony Sat-A50
This thread has 6 replies. Displaying all posts.
Post 1 made on Saturday March 24, 2001 at 22:09
Allen J.
Historic Forum Post
I am starting a project that has 2 Sony Sat A50 DSS recievers working on RF in a yacht. I have only seen a single set of codes listed and am not sure how to make both work via RF. Thanks
OP | Post 2 made on Saturday March 24, 2001 at 22:26
Daniel Tonks
Historic Forum Post
Actually, you can't directly control RF devices. Not with any universal remote. Sony also only has one set of IR codes.
OP | Post 3 made on Sunday March 25, 2001 at 15:41
Hansi
Historic Forum Post
Does the receivers ONLY work with RF or do you have an IR option?

Using the theatertouch and the irf-6 you can easily configure this by using one irf-6 ir port for each receiver and program the theatertouch to forward the ir commands to the specific port for each receiver.
OP | Post 4 made on Monday March 26, 2001 at 00:04
Allen J.
Historic Forum Post
Thanks for the info. I have 2 extra ports open on the IRF-6 and the Sony's do have IR control. I was trying to be lazy. Thanks for the fast responses!
OP | Post 5 made on Wednesday April 4, 2001 at 22:31
Allen J.
Historic Forum Post
After looking into it, the Sony recievers appear to be RF only. I learned their codes and shot them at the plastic window on the face with no luck. The remote has both rf and IR......Is their something I'm missing? Just getting into the T2 and haven't dealt with the Sony recievers much...help!
OP | Post 6 made on Wednesday April 4, 2001 at 23:00
Chad
Historic Forum Post
I'm not familiar with the A50, but on my Sony SAT-A2 DSS recevier with the RF/IR remote, the receiver can respond to respond to either RF or IR but not both at the same time. If you go into the receiver's setup menu, there is an option that lets you set the receiver to IR mode.

Chad
OP | Post 7 made on Thursday April 5, 2001 at 22:18
Daniel Tonks
Historic Forum Post
The A50 can only work with RF *or* IR. Through a trick, the A2, A3 and A4 can operate with both at the same time.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse