Post 1 made on Sunday March 4, 2001 at 01:35 |
I'am having a problem with dish Network boxes when I use a channel macro. If I assign say channel 200 to a CNN icon with a macro it will only register the 00. I have tried to put in fillers * or delays but it has not worked. I am up for any ideas. Thanks AJ
|
|
OP | Post 2 made on Sunday March 4, 2001 at 09:26 |
Bill E Historic Forum Post |
|
|
I did not have any problems with my dish network, have you tried the Echostar file from RTI's site? [Link: rticorp.com]They are all tested and working files. Bill www.homeautomationnet.com
|
|
OP | Post 3 made on Sunday March 4, 2001 at 10:50 |
Double-click on the commands in the Macro editor for the particular macro and change the minimum repeats to 2 or 3 and try it again.
Vin
|
|
OP | Post 4 made on Monday March 5, 2001 at 15:23 |
Robert Historic Forum Post |
|
|
this will work......i've notice this same thing on satelite and digital cable....when making the macro throw in a misc. ir command from a component you don't even have....any command (example vol+ lexicon dc-2)then put in your commands two, zero ,zero, enter...try it out.....don't just put two number two's because sometimes it will get that extra number two and you will end up with 220 every once in while.....robert
|
|
OP | Post 5 made on Wednesday March 7, 2001 at 02:44 |
I will try all and let you know thanks for the info. AJ
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.