Post 1 made on Wednesday May 21, 2008 at 17:55 |
drewski300 Super Member |
Joined: Posts: | January 2007 3,849 |
|
|
Can anyone verify an open and close for their R2D7 module? It's an RS232 communication device that came with the Lectric II screen. It's OEM'd by Electronic Solutions.
*0o00; for open/ *0c00; for close. (these are all motor commands)
I have the XP8 and a T4. Out of the XP8 I have a 5e going directly to the module with a RJ11. Also, I have tried using both supplied adapters with 568a to the RS232 input of the R2D7. I've tried switching the Transmit and Receive and still nothing. The 5e is 30' long with 9600 baud rate. I've checked the ports, verified cable and I've added character delay's. Any tips?
|
"Just when I thought you couldn't possibly be any dumber, you go and do something like this... and totally redeem yourself!" |
|
OP | Post 2 made on Wednesday May 21, 2008 at 18:03 |
drewski300 Super Member |
Joined: Posts: | January 2007 3,849 |
|
|
I also can't use the relays because I've already used them up.
|
"Just when I thought you couldn't possibly be any dumber, you go and do something like this... and totally redeem yourself!" |
|
OP | Post 3 made on Thursday May 22, 2008 at 21:50 |
drewski300 Super Member |
Joined: Posts: | January 2007 3,849 |
|
|
I got it. Nevermind.
|
"Just when I thought you couldn't possibly be any dumber, you go and do something like this... and totally redeem yourself!" |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.