RC: Video Sensors on a RP-1

The following page was printed from RemoteCentral.com:

Forums > Professional > RTI Control Systems

Video Sensors on a RP-1

Forum Search

Topic:

Video Sensors on a RP-1

This thread has no replies.

Post 1 made on Saturday April 12, 2008 at 02:43

Glackowitz

RC Moderator

Joined:
Posts:

May 2002
3,793

View Profile

I used a Clear blue video sensor today on a RP-1. I used the VS-B but looks like the VS-A Will work as well

I ran power and ground to the +12 and Gnd terminals from the RP-1(used 4 cond) then NO to the sense input and com was connected to the +12 as well, worked like a champ

We had a few of these around as we use them on Crestron systems as well and thought I would give one a try as we installed a VCR with power toggle for a client today

[Link: cbav.com]

[Link: cbav.com]

There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far.

| Forum Search |

Return to thread index...

Jump to

	Before you can reply to a message...
	You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.


©1998-2024, Daniel Tonks. All rights reserved. Contact \| Advertise Home \| News \| Reviews \| Features \| Files \| Forums \| Search