Working with a new AVR 247 and need to find the codes for HDMI 1 and HDMI 2.
Right now you have to toggle on the AVR remote. I would like to be able to assign specific button on the T-3 for cable and DVD.

Dont you assign the HDMI Inputs to a source, then select the source they have been assigned to??

Its that way on the Integra Receivers, no discrete HDMI codes as the HDMI inputs are assined to inputs in the setup menus.

Looks like the remote has the inputs on it

Just learn them into the library

No on the AVR you cannot set-up HDMI 1 to input on video one and so on. You can program any of the other video inputs, (comp 1, composit 1, s-video.) to video 1,2,3 or 4 accordingly.

actually, it's not a toggle on the remote, when it lights up red it's HDMI 1, and when it lights up green it's HDMI 2. it takes a bit of patience to learn the correct code from the remote, but it will work as a discrete.


i can send you the hex if you can't get it.
email me at chris(underscore)brewer(at)hotmail(dot)com