|Post 1 made on Thursday March 20, 2008 at 21:37|
Just a heads up.
I was working on a NeoPro Borrego today and decided to use the provided codes in the database.
When I did my first Borrego a year or so back I wrote out every command and have just cut and pasted them into RP6s as I needed them.
After using the drag and drop I noticed that nothing worked for the Audio+Video+Component commands.
After a call to Bill... he said he had just gotten word from Jason that there was an issue in the serial for the Borrego.
8 bit 9600 no parity 1 stop
Took a look at the codes...
[B00,00,1,1] This was the code for Send Component+A+V 1 to Output 1.
Problem is... this is what it should have looked like...
Looked at the whole list and they are all like that for 8x8 Borrego.
So if you use the drag in codes... just click on it and edit out one of the 0s in the first part. Maybe we could just add it corrected to our mega base.
|Post 2 made on Thursday March 20, 2008 at 23:47|
I noticed this as I was programming one the other day. I fixed all of the global board commands in the Mega 232 list already (as well as some Denon strings that I found to be incorrect). I will submit the edited version as soon as I have time.
|OP | Post 3 made on Friday March 21, 2008 at 06:34 |
Just woke up and sent in the corrected Borrego only. Thats what I get for having a cold...
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.