On March 17, 2008 at 11:28, imt said...
You couldn't control an AMX or Crestron direct from the
remote via RF but you can connect the processsor to the
crestron or amx sysrem and send Rf to the RTI processor
that then sends RS-232 to the crestron system.
Actually both Amx and Rti run on 433 mhz so you can add a rf receiver (Amx's receiver,not Rti's)to the Amx processor and use special trigger codes from the rti and control the Amx. You would have to have the progamming in the amx to receive the codes, but you can do it.