i am programming a t3 remote and i have 6 sources that i lined down the left side (see picture) and i need to add a power button and a lights button with the same style button. the problem is, the glass style doesnt have a reversed button of the 118x51 size button. is there any way to flip the buttons that are in the software?

Are you looking to do something like this??



The lights and power buttons are reversed, right click your buttons then on the properties click the reversed state, this will look normal when its pressed

and the sources will go green when pressed

Also looks like you have macros and page flips on your buttons, are you using a RP-1 or RP-6??

If so you should have page links in the macro and call system macros from the RP unit
Shoot me an email if you are not sure what I am talking about, I can show you some examples

i wanted the light icon and power icon to be on the far right. you know how the small half oval type icons are, they have a left side and right side icon. i want it so the flat side is on the right as well as the icon. yes i have an rp-6 in the system.

like this:

you mean like this?




just use the blank button w/ no logo and insert the images not on any buttons

i just dont think the button looks right with the flat side not 'docked' on the side of the remote.

You can extract most of the graphics from the native Glass file by using a hex ripper (many available as freeware). I have not had success extracting 100% of the files for some reason.

You then can manipulate at will with a good graphic editor.

I created white glow borders for the pressed states of the source buttons to replace the green glow which was not a good color match for some backgrounds I was using. You could easily invert images.

[Link: remotecentral.com]\-rip