On January 18, 2008 at 20:12, ddarche said...
Come on Troy, you could have at least spent a minute to
expand on your comments ;>)
There is a menu in the LS28 in which you can change to
be IR ready instead of RF ready. Once changed it will
then be able to be controlled by any universal IR remote.
Dave
I usually do but I was closing out as I saw this. I figured if he wanted to know how he would post again :)
FYI... the IR eye is located behind the lower horizontal trim strip.
[Link: remotecentral.com][Link: remotecentral.com]