Does anyone have an example of a set up with a 3 zone grafik eye??

They want to have control when they press play on the dvd and hd dvd. pause and all on for stop and power off. on the ir codes certain scenes say up and certain say down. Does that really have any effect on what scenes i have programmed. they would also like to be able to control the levels of each zone independently.

I would like to set up a button for each zone and have the scroll controll the individual zones. I haven't been able to find the IR codes for the individual zones.

Thanks,
Dave

I just used the same type of setup using the Lutron GA (works) in the master/mega template. Set up 4 scenes based on three zones of lights (GRX-2403). Customer presses pause / stop and the lights go on, play shuts them down or sets them to watch mode. What the scenes are is up to the theater room/customer/preference.

Makes sense to put a "take a break" button on each device so you can quickly pop the lights on in case you need to.

To be able to control individual zones, look in the Manuel that came with the Graphic Eye under "ignore” there are 16 discreet IR codes to control all 16 discrete screens, what you can do for example is work with scenes 1 through 5 for zone 1, all you do is tell zone 2 and 3 to ignore scene commands 1 through 5. Then set zone two to only respond to scenes 6 - through 10 and zone 3 to respond to only 11 though 15. You can make scene 16 a global all on command