|
|
|
The following page was printed from RemoteCentral.com:
Any device to receive IR codes and...
| |
|
Topic: | Any device to receive IR codes and convert to hex/RTI codes? This thread has 12 replies. Displaying all posts. |
|
Post 1 made on Tuesday December 18, 2007 at 14:42 |
jarobata Lurking Member |
Joined: Posts: | December 2007 3 |
|
|
I have devices (like a toshiba HD dvd player) where they IR codes aren't available for use with my RTI theatertouch remote and I was wondering if there was a device I could hook up to my computer and point a remote at and read in codes 1 by 1.
|
|
Post 2 made on Tuesday December 18, 2007 at 14:58 |
Designermike Long Time Member |
|
|
Why not use your IR-PRO ?
|
Crestron DMC-D |
|
OP | Post 3 made on Tuesday December 18, 2007 at 15:08 |
jarobata Lurking Member |
Joined: Posts: | December 2007 3 |
|
|
That's exactly what I was looking for, is this easy to use and how much does it cost?
|
|
Post 4 made on Tuesday December 18, 2007 at 15:13 |
Designermike Long Time Member |
|
|
Contact your local RTI Dealer, he should be able to learn or make any adjustments to your remote; otherwise your out of luck the IR-PRO is available to dealers only.
|
Crestron DMC-D |
|
Post 5 made on Wednesday December 19, 2007 at 02:59 |
tgrugett Select Member |
Joined: Posts: | August 2004 1,850 |
|
|
Pick up a used pronto TSU1000, 2000, 3000, 3500, 6000, 7000, 7500 etc.....
You can learn and view codes and the copy-n-paste into a variety of places.
|
|
|
Post 6 made on Saturday December 22, 2007 at 17:14 |
anyhomeneeds Super Member |
Joined: Posts: | December 2007 4,149 |
|
|
Sorry, just like the software, the IR-Pro is for the dealers only.
|
"You can't fix stupid." |
|
Post 7 made on Monday December 24, 2007 at 10:20 |
pesci Senior Member |
Joined: Posts: | August 2006 1,211 |
|
|
Can u copy IR codes from a manufacturers website and past them in some where, or does it have to b like a pronte hex file to paste in hex. I got 2 new devices i need codes for and i found them on website but gotta figure out how to import to ttd library!! thanx
|
|
|
Post 8 made on Monday December 24, 2007 at 19:21 |
ralliart329 Active Member |
Joined: Posts: | October 2007 655 |
|
|
You can only paste in hex codes. If you found TTD IR libraries that contain the codes you are looking for then you can open it as is in TTD. If you need them to be learned you should contact a dealer.
|
|
Post 9 made on Tuesday December 25, 2007 at 22:04 |
pesci Senior Member |
Joined: Posts: | August 2006 1,211 |
|
|
i am a dealer but need some codes for 2 new devices. can i take the ir codes from the manufacturers website and paste them in to the library or does it only have to be hex???
|
|
|
Post 10 made on Wednesday December 26, 2007 at 04:21 |
vbova27 Super Member |
Joined: Posts: | July 2006 2,987 |
|
|
On December 25, 2007 at 22:04, pesci said...
i am a dealer but need some codes for 2 new devices. can i take the ir codes from the manufacturers website and paste them in to the library or does it only have to be hex??? What 2 devices and codes do you need?
|
|
Post 11 made on Wednesday December 26, 2007 at 08:49 |
Springs Super Member |
Joined: Posts: | May 2002 3,238 |
|
|
Has to be hex but there are lots of ways to convert codes.
But like vbova27 stated... what are you trying to import.
|
|
Post 12 made on Wednesday December 26, 2007 at 18:34 |
pesci Senior Member |
Joined: Posts: | August 2006 1,211 |
|
|
On December 26, 2007 at 04:21, vbova27 said...
What 2 devices and codes do you need? i need a pioneer dvd dv46A discretes on/off for a T2C/RP 1, havent been to job yet so i dont know if play turns it on. And i also have a job where a guy has a JVC 42" LCD in bedroom, i dont have this model number yet either. That is why i was just curious to know. I was diggin around the manufacturers website and saw ir codes for some commands, and also saw pronto hex codes. Didnt know if i could get the ir codes like say from DISCRETE CODE FORUM, and copy and paste. Never did it before so i was curious... thanx and hope everyone had i wonderful holiday..
|
|
|
Post 13 made on Thursday December 27, 2007 at 14:59 |
vbova27 Super Member |
Joined: Posts: | July 2006 2,987 |
|
|
On December 26, 2007 at 18:34, pesci said...
i need a pioneer dvd dv46A discretes on/off for a T2C/RP 1, havent been to job yet so i dont know if play turns it on. And i also have a job where a guy has a JVC 42" LCD in bedroom, i dont have this model number yet either. That is why i was just curious to know. I was diggin around the manufacturers website and saw ir codes for some commands, and also saw pronto hex codes. Didnt know if i could get the ir codes like say from DISCRETE CODE FORUM, and copy and paste. Never did it before so i was curious... thanx and hope everyone had i wonderful holiday.. You should be able to copy and paste the Pronto codes into the IR library.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|