| Post 1 made on Sunday December 9, 2007 at 18:38 |
LI Installs Long Time Member |
Joined:
Posts: | February 2005
20 |
|
|
First time user with RTI systems
I am using the K4 with 26 cable boxes and I am trying to set it up
with 5 RP6 control units.
I am unable to send the commands to any of the RP 6
I do not see a check off on the devices properties for RF
I have updated all the firmware
and I am able to upload to the K4 and RP6
just not sure if I have the right setting for RF
Any help would be great
Thanks
Tom
|
|
| Post 2 made on Sunday December 9, 2007 at 18:45 |
SAAudio Advanced Member |
Joined:
Posts: | March 2007
993 |
|
|
I am confused.
Do you really have a K4 or a T4?
With a K4, you wont have RF trigger codes. They would be IR. How do you have the RTI system hooked up?
|
|
| OP | Post 3 made on Sunday December 9, 2007 at 18:55 |
LI Installs Long Time Member |
Joined:
Posts: | February 2005
20 |
|
|
K4 in wall touch
I have 20 something cable boxes in two racks
Five RP 6 units
each one of the boxes are
connected to a IR output on the RP
if there is no RF
now will do I send communicate from the k4 to the rp6
|
|
| Post 4 made on Sunday December 9, 2007 at 19:01 |
cpchillin Select Member |
Joined:
Posts: | September 2007
2,239 |
|
|
You use a cat5 cable to an RP6 and link the RP6's.
|
Who says you can't put 61" plasmas up on cantilever mounts using toggle bolts? <---Thanks Ernie ;) |
|
| OP | Post 5 made on Sunday December 9, 2007 at 19:30 |
LI Installs Long Time Member |
Joined:
Posts: | February 2005
20 |
|
|
|
| Post 6 made on Sunday December 9, 2007 at 21:06 |
cpchillin Select Member |
Joined:
Posts: | September 2007
2,239 |
|
|
If I remember right there is even a technical bulletin on their dealer site.
|
Who says you can't put 61" plasmas up on cantilever mounts using toggle bolts? <---Thanks Ernie ;) |
|
| Post 7 made on Sunday December 9, 2007 at 22:26 |
cheesehead22 Long Time Member |
|
|
I like useing the CB4 no matter how many touch screens I have. Makes hook up easy and make futer add ons even easier.
|
Don't read my answer. Someone else will go into great detail as to why I am wrong rather than answer the original question... |
|
| Post 8 made on Sunday December 9, 2007 at 22:59 |
cpchillin Select Member |
Joined:
Posts: | September 2007
2,239 |
|
|
I love the CB4!! But with only one touchpanel I find it hard to justify. Can you believe I've had to go behind guys that used the CB4 but used the terminal block to terminate instead of RJ45!! It's such a pain in the @$$ that way! Especially when if they did it right I could've updated the touchpanel from the network if they hooked it up right.
|
Who says you can't put 61" plasmas up on cantilever mounts using toggle bolts? <---Thanks Ernie ;) |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
