| Post 1 made on Wednesday November 28, 2007 at 20:33 |
I have a few Xantech RGC11 Line Level Attenuators in a system I was doing and need to address each of them individually. I am running out of output ports on my RP-6 and would like to use the addressing feature built into the RGC11's. From what I read, if you have the RC68+ you can set the pots on the back to "FF" and then press one of the buttons on the front of the RC68+ to change the address to the button that was pressed. The problem is, I don't have an RC68+. My Xantech rep told me that RTI or Universal should have the appropriate codes in their libraries but I can't seem to find them. Does anyone have the "FF" series of codes so that I can change the RGC11 addresses? Is there any other way to do it? Or am I simply missing something and the "FF" codes are in the library?
|
|
| Post 2 made on Thursday November 29, 2007 at 02:16 |
tgrugett Select Member |
Joined:
Posts: | August 2004
1,850 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
