|
|
|
RTI Control Systems Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Splitting one RP-6 output for 2 RS-232...
| |
|
Topic: | Splitting one RP-6 output for 2 RS-232 sources? Issues? This thread has 11 replies. Displaying all posts. |
|
Post 1 made on Monday November 19, 2007 at 11:43 |
thebland Long Time Member |
Joined: Posts: | June 2006 200 |
|
|
Any issues using one RP-6 output for 2 different sources? I am using an anamorphic lens slide (4 commands) and a Stewart Electrimask BRIC control screen (10 commands). Both use RJ-45 (cat5 SE) and I have a Serial to RJ45 adapter. I would combine the RJ-45 cables into a 2 to 1 splitter and then into adapter and into the 1 RP-6 output. Would there be any issues doing so as I have run out of outputs on my RP-6...?
|
Jeff |
|
Post 2 made on Monday November 19, 2007 at 11:58 |
rlustig Advanced Member |
Joined: Posts: | June 2004 915 |
|
|
HAve never tried it, but I wouldn't count on that working. Get a second RP6, or get an RP1, move an IR only device to the RP1 and use the now open port of the RP6 for the odd device out.
|
|
Post 3 made on Monday November 19, 2007 at 12:22 |
SDZD Senior Member |
Joined: Posts: | October 2003 1,082 |
|
|
You can see if one of these would work [Link: xantech.com]I have always wondered if it would work or not
|
|
Post 4 made on Monday November 19, 2007 at 13:04 |
dinom Active Member |
Joined: Posts: | February 2004 643 |
|
|
The Xantech device that SDZD points to "should" work as the RP6 is only one way, so all commands should just get replicated to the other three ports. As long as the serial devices don't have overlapping command sets, that should work.
|
|
Post 5 made on Monday November 19, 2007 at 13:32 |
imt Long Time Member |
Joined: Posts: | June 2007 466 |
|
|
Here is an option as well from Kramer electronics. [Link: kramer-us.com]
|
|
Post 6 made on Monday November 19, 2007 at 14:00 |
cheesehead22 Long Time Member |
|
|
On November 19, 2007 at 13:32, imt said...
Here is an option as well from Kramer electronics. [Link: kramer-us.com]We are 0 for 4 on useing these products. They have worked for a couplde of months and then just crash. I hav eno faith in them what so ever.
|
Don't read my answer. Someone else will go into great detail as to why I am wrong rather than answer the original question... |
|
Post 7 made on Monday November 19, 2007 at 14:51 |
imt Long Time Member |
Joined: Posts: | June 2007 466 |
|
|
On November 19, 2007 at 14:00, cheesehead22 said...
We are 0 for 4 on useing these products. They have worked for a couplde of months and then just crash. I hav eno faith in them what so ever. I have never used them personally but someone recommended there name when someone was trying to do something similar with a Netstreams system. Thought I would throw it out there but glad to know I should avoid it.
|
|
Post 8 made on Monday November 19, 2007 at 17:48 |
markrubin Founding Member |
Joined: Posts: | February 2002 919 |
|
|
the solution is simple Jeff
order an XP8
Mark
|
|
Post 9 made on Monday November 19, 2007 at 18:27 |
sir spark alot Long Time Member |
Joined: Posts: | December 2005 100 |
|
|
On November 19, 2007 at 17:48, markrubin said...
the solution is simple Jeff
order an XP8
Mark And don't forget to schedule the install out to the first quarter 3rd millenium!
|
|
Post 10 made on Monday November 19, 2007 at 18:28 |
RTI Installer Super Member |
Joined: Posts: | March 2002 3,320 |
|
|
On November 19, 2007 at 11:43, thebland said...
Any issues using one RP-6 output for 2 different sources? I am using an anamorphic lens slide (4 commands) and a Stewart Electrimask BRIC control screen (10 commands). Both use RJ-45 (cat5 SE) and I have a Serial to RJ45 adapter. I would combine the RJ-45 cables into a 2 to 1 splitter and then into adapter and into the 1 RP-6 output. Would there be any issues doing so as I have run out of outputs on my RP-6...? I have done this and it works fine, so long as you are only addresing one serial device at a time
|
Never Ignore the Obvious -- H. David Gray |
|
OP | Post 11 made on Monday November 19, 2007 at 22:05 |
thebland Long Time Member |
Joined: Posts: | June 2006 200 |
|
|
Thanks, RTI installer.. I'll give it a go.
Mark, is the XP 8 out yet? What is that puppy going to run?
|
Jeff |
|
Post 12 made on Thursday April 24, 2008 at 11:51 |
MirekVonZlin Lurking Member |
|
|
Easy ))) I have created a special black box with 1 IR & 1 RS232 input and 16 RS 232 outputs, can be up to 25 ))) But without special piece of HW it could work too, but it depends how correctly are RS232 inputs designed ... At some installation I needed one more RS232 port, so I tried to switch one RS232 output by internal relays to two devices, at first switch ON only that corresponding relay, pause for 0,5 sec an then send a command. I was lucky, it was working and for more than 2 years no complain from client.
|
MirekVonZlin (Miroslav Smycka) |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|