Post 1 made on Friday November 2, 2007 at 09:28 |
reclipse Long Time Member |
Joined: Posts: | December 2006 216 |
|
|
Had 2 Systems in a condo (10th floor, top floor), 1 with a T4 and a RP-6 with an RM-433 (media room). Also have an RP-6 and several RM-433s spaced around the house for a seperate house music system. now...... until a few days ago it worked, then we suddenly had an RF-range on 1 foot (or less) but only around the media rack. The RM-433s spaced around other parts of the house work fine. Talking to the building people the onyl thing that changed was a series of AC units that were swapped out. The old ones had 3 stage motors and the new ones are single stage. Also they are over 100ft away from the condo. Any ideas? similar situations? In the Media Room i've already fitted the RP-6 with an IR receiver to use IR trigger codes. Not as easy in the near by Music area with no TV and limited access.
|
Joe C the Cable Guy |
|
Post 2 made on Friday November 2, 2007 at 10:17 |
AndyM Founding Member |
Joined: Posts: | March 2002 1,470 |
|
|
Did you try swapping the RM433 that is having the range issues?
I've had a few go bad over the years.
|
|
Post 3 made on Monday November 5, 2007 at 19:06 |
Rob Zurn Founding Member |
Joined: Posts: | August 2001 32 |
|
|
Are any or all of the RM-433s showing any noise recepiton via their LED?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.