Post 1 made on Sunday September 9, 2007 at 20:58 |
markrubin Founding Member |
Joined: Posts: | February 2002 919 |
|
|
Elan HD system controlled by RK3's & T4/RP-6
Using the MCuPro 2.0 software/MCU Terminal I can control the HD via RS232:
Put the same command into the RTI program: no luck: tried slower baud and null modem adapter: the RP-6 indicator light comes on when I send a command but the Elan is not responding
Any ideas?
Thanks
|
|
OP | Post 2 made on Sunday September 9, 2007 at 21:15 |
markrubin Founding Member |
Joined: Posts: | February 2002 919 |
|
|
never mind! brain freeze
forgot a carriage return!
|
|
OP | Post 3 made on Wednesday September 12, 2007 at 08:16 |
markrubin Founding Member |
Joined: Posts: | February 2002 919 |
|
|
Now I want to set all RS232 commands as system macros in an RP-6:
there are a lot of them: is there any way I can copy and paste a list into an RP-6?
|
|
Post 4 made on Wednesday September 12, 2007 at 17:29 |
AndyM Founding Member |
Joined: Posts: | March 2002 1,470 |
|
|
You can copy paste Macros from one device to another...
Just create your macros on the RP6 and right click away.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.