can't figure this out. downloaded direct mits tv input codes and component input didn't work. then deleted mits direct and tried again. no component input in list any longer. i think i am doing something wrong. i tried directly in theatertouch ir import from internet and the internet command library in case they are not exactly the same. any ideas? thanks in advance.
jason

Mits codes are-CROSS YOUR FINGERS AND HOPE THEY WORK!
Out of 20 or more mits tv's I have found 3 that discretes work on.

If there's no component input code, can you do an earlier discrete input then use a normal "input" command to step over?

My Mitsubishi has been using the descrete codes for my inputs without any problems, then again I don't have component inputs so perhaps that is the difference. I wonder if the codes are just not captured cleanly? Daniels suggestion sounds like a good one to me if you can reliably get to any of your inputs.

You could try learning the codes by hand to make sure you have a good set. Here is a method that works with my older RPTV:

Those codes may not work with some of the older Mitsubishi sets, so the following may help a little.

"If anyone wants to learn it fromt their Mits remote you can do this. Works like a dream on a VS50603, for Direct access to the inputs. Here's how you do it. If you know how to program the Mits remote, this is easy to do.

Programming requires you to hold power button(wile in the mode you want to program), Put it in TV mode, Hold power and type in "90", To access each input directly you have to hit input then the number( 1 though 5+ ). Keep in mind wile programming your other remote, when you press input, it doesnt send out any codes, only when you press the 1 through 5.

To reset the remote back to normal, Hold power again(in tv mode) and Press "00" and it will be back to normal"

Hope that helps!

Will

thank you all for the help. daniel, i used the step up method and it is great. i was using a form of that but it worked only if i was at my main input. this is much better. thanks again.

please email me i am looking for sony remote rm-y139
codes

hello friends out there,

can anybody help me find the locked code of my Mitsubishi VS-4003 I cannot enter my ext and some of my channels

thank you