Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Problem controlling Escient with a T2C
This thread has 3 replies. Displaying all posts.
Post 1 made on Friday June 29, 2007 at 06:45
Oz AVI
Senior Member
Joined:
Posts:
November 2004
1,087
This afternoon I was at a clients installing an Escient Fireball SE80i, all works fine with the Standard remote but when I loaded the commands into the T2C (RP6 also) the only commands that work are the cursor/scroll up and down.
Nothing else works! As it was last thing Friday afternoon, I took a shortcut and used an emitter over the IR window, intending to return early next week to wire in via the IR port on the back. I did try varying the output level on the RP6.

When I got home, I've got a Escient Fireball SE160i of my own (one week old) that, once again I've been using the standard remote until I get around to programming my T2C, I figured that now was the time to program it! Thought I would set it up in 'stand alone' mode, and same thing! Scrolls up and down, but nothing else. Tried altering repeats, still no good.
Any ideas?

TIA
Iain
OP | Post 2 made on Friday June 29, 2007 at 08:59
Oz AVI
Senior Member
Joined:
Posts:
November 2004
1,087
I worked it out! Bit embarrassing, when I captured the codes I tried to learn the buttons for FB1, FB2, etc., I now realize that by the time I had tried to learn in FB4 I was learning the codes for.............you guessed it, not FB1!
Now works fine. DUH!
Post 3 made on Friday June 29, 2007 at 09:37
roddymcg
Loyal Member
Joined:
Posts:
September 2003
5,955
D'oh...
Not life, but good life, is to be chiefly valued.
Post 4 made on Wednesday July 4, 2007 at 18:07
kingnothing
Long Time Member
Joined:
Posts:
July 2007
11
glad to know I'm not the only who has traveled down this road.
Alcohol and night swimming, it's a winning combination!


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse