Post 1 made on Tuesday June 26, 2007 at 16:11 |
tippy-tie Long Time Member |
Joined: Posts: | July 2004 479 |
|
|
hi guys!
normally I wouldn't post like this before testing codes but here goes.
Need the dish ViP 622 Dual DVR codes either in RTI or Crestron .ir format.
am doing a crestron project 4 hours away from our shop that has this dish dvr.
I wont be able to test the codes in the database before going out there, so can someone confirm exactly what library file I should be using for both zones of this device? or send me a file?
please send to nick at chathen dot com
Thanks
|
|
Post 2 made on Tuesday June 26, 2007 at 16:52 |
Ridenour Long Time Member |
Joined: Posts: | October 2005 199 |
|
|
The codes in the database work fine, just make sure the code-set is right in the 622. It should be set to 1 out of the box, and the files in the RTI db are for 1 unless they specify otherwise. As far as the "other zone" is concerned, if you are referring to the "home distribution" RF output then you are SOL unless you are planning on using the supplied "2" remote- it is Dish RF control only...
|
Procrastination is the art of keeping up with yesterday. -Don Marquis |
|
OP | Post 3 made on Tuesday June 26, 2007 at 17:31 |
tippy-tie Long Time Member |
Joined: Posts: | July 2004 479 |
|
|
thanks. looks like I wont be using the "2" after all.
|
|
OP | Post 4 made on Tuesday June 26, 2007 at 17:32 |
tippy-tie Long Time Member |
Joined: Posts: | July 2004 479 |
|
|
now would anybody have the crestron file?
Last edited by tippy-tie
on June 26, 2007 18:15.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.