I have a large system file with over 5 rooms. Most of the remote is going to be standalone (client has IR for exposed cable boxes and TVs), so I defaulted the system to standalone. I have 8 pages of channel macros that now need to be addressed for channel number to a default output on the RP-6 - can this be done after the fact easily without having to go into each macro and edit each individual number?

If this is the case, you should be able to change the routing via right clicks just like the properties for RF trigger set commands. It's something they should probably add... I know you get an opportunity to do this when you are creating a channel macro, but I just copied all my local cable box standalone channel macros to the central cable box unit that will be in the equipment room.

VB

you can change all the channel macros to standalone easily: just draw a red line around all of them, right click/edit properties and (multiple buttons) menu comes up: select output and change to standalone

However if you want to change the routing, say to a different port on an RP-6, that has to be done by editing each macro: RTI needs to add the ability to do this globally: what I do is use the channel macro wizard and redo all the macros after changing the port assignment

you can highlight like you mentioned above and it will work. just unclick the boxes you dont want. some may be shaded out but can be unchecked.