| Post 1 made on Wednesday October 4, 2000 at 01:11 |
Where do I place the IR bug on a Toshiba 55 hi Def?
Are ther any discrete IR codes for the toshiba such as video inputs or on off?
Thanks
|
|
| OP | Post 2 made on Wednesday October 4, 2000 at 01:16 |
Daniel Tonks Historic Forum Post |
|
|
What do you mean "IR bug"? You mean the emitter? It should be placed over the IR sensor... if it's not marked on the unit, it's usually shown in the manual.
|
|
| OP | Post 3 made on Saturday October 7, 2000 at 11:58 |
Some toshiba's and other rear projection tv's have the sensor in the screen.
If it is a rear projection set pull the grill cloth off and remove the 4 to 6 screws at the bottom of the trim piece that holds the screen on then lift straight up un the front of the set the whole screen and trim will come off.....You will now see the ir sensor(little bubble)
push the emitter in through the back and place it next to or on top of the sensor.............
OH!!!! UNPLUG THE TV FIRST.....
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
