Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 1 of 4
Topic:
Denon AVR-4306 Need IR Codes
This thread has 55 replies. Displaying posts 1 through 15.
Post 1 made on Friday September 29, 2006 at 10:40
mikea074
Lurking Member
Joined:
Posts:
September 2006
7
Any one have the IR codes For a AVR-4306 For a T3\

Thanks.

Please email [email protected]
Post 2 made on Friday September 29, 2006 at 20:15
Glackowitz
RC Moderator
Joined:
Posts:
May 2002
3,793
Have you tried codes from other models?? Alot of the time codes carry over from year to year

Try some other models and see if they work for you
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far.
Post 3 made on Friday September 29, 2006 at 21:46
Springs
Super Member
Joined:
Posts:
May 2002
3,238
Delt with a 6 the other day and the codes from prior years worked.
Post 4 made on Friday September 29, 2006 at 22:06
RTI AV INSTALLER
Long Time Member
Joined:
Posts:
January 2005
93
most will work but some of the discrets like -20bd will not its now a game mode.
Any sufficiently advanced technology is indistinguishable from magic. -Arthur C. Clarke
OP | Post 5 made on Monday October 2, 2006 at 09:21
mikea074
Lurking Member
Joined:
Posts:
September 2006
7
Thanks Guys
Post 6 made on Tuesday October 10, 2006 at 03:03
tgrugett
Select Member
Joined:
Posts:
August 2004
1,850
I have all of the Denon documented AVR codes in an excel format for quick cut and paste. It is a beta version. They work for the 5806, 4806, 4306, 3806, 2807, 1905 and others. I do not have them in the RTI library yet but I imagine you only need the 4306 specific codes (iPod, USB, Net etc...). All the 3806 codes found in the master library work for the 4306. I can email the file.

About the file... using make hex, I generated all of the sharp and most of the possible Kaseikyo codes using the device numbers applicable to Denon AVRs. I organized them in worksheets by make hex device number and documented the applicable codes in pronto hex and their function names. There are many unused codes but I figured that they could be filled in as new ones came down the pipe and I expect a number of new codes with their next releases. I bent more than one ear at Denon about iPod, USB and Net control from zone 2/3.

The codes you may need are can be found on the Denon-K 4.1 page.
Post 7 made on Tuesday October 10, 2006 at 15:25
ddarche
Mr. RemoteQuest
Joined:
Posts:
February 2002
2,309
Hey Troy,

Would you mind emailing me a copy of that spreadsheet?

Thx Dave
Dave D'Arche
http://RemoteQuest.com
Fine Home Theater Remote Controls & Solutions - Programming services for most remotes
OP | Post 8 made on Wednesday October 11, 2006 at 10:42
mikea074
Lurking Member
Joined:
Posts:
September 2006
7
Thats great i would love a copy

Please email it to me
Post 9 made on Wednesday October 11, 2006 at 11:22
tgrugett
Select Member
Joined:
Posts:
August 2004
1,850
You both have mail. Let me know if there was any problems with the mail. My email has been moody lately.
Post 10 made on Sunday October 29, 2006 at 14:41
krishans3
Lurking Member
Joined:
Posts:
October 2006
6
Hello,

Could you please e-mail me the Denon 4306 codes. My email address is [email protected]

Thanks,

Krishans

On 1160463811, tgrugett said...
I have all of the Denon documented AVR codes in an excel
format for quick cut and paste. It is a beta version.
They work for the 5806, 4806, 4306, 3806, 2807, 1905 and
others. I do not have them in the RTI library yet but
I imagine you only need the 4306 specific codes (iPod,
USB, Net etc...). All the 3806 codes found in the master
library work for the 4306. I can email the file.

About the file... using make hex, I generated all of the
sharp and most of the possible Kaseikyo codes using the
device numbers applicable to Denon AVRs. I organized them
in worksheets by make hex device number and documented
the applicable codes in pronto hex and their function
names. There are many unused codes but I figured that
they could be filled in as new ones came down the pipe
and I expect a number of new codes with their next releases.
I bent more than one ear at Denon about iPod, USB and
Net control from zone 2/3.

The codes you may need are can be found on the Denon-K
4.1 page.
krishans
Post 11 made on Friday November 3, 2006 at 10:44
estech
Active Member
Joined:
Posts:
August 2002
584
tgrugett
I would like to get a copy too, please.

I'm getting ready to program for my first Denon system, and there are three different receivers in it, so this would definitely be helpful.

Thanks,
Scott
Pay no attention to that man behind the curtain.
Post 12 made on Monday November 6, 2006 at 16:42
wlfman13
Lurking Member
Joined:
Posts:
November 2006
1
On October 10, 2006 at 03:03, tgrugett said...
I have all of the Denon documented AVR codes in an excel
format for quick cut and paste. It is a beta version.
They work for the 5806, 4806, 4306, 3806, 2807, 1905 and
others. I do not have them in the RTI library yet but
I imagine you only need the 4306 specific codes (iPod,
USB, Net etc...). All the 3806 codes found in the master
library work for the 4306. I can email the file.

About the file... using make hex, I generated all of the
sharp and most of the possible Kaseikyo codes using the
device numbers applicable to Denon AVRs. I organized them
in worksheets by make hex device number and documented
the applicable codes in pronto hex and their function
names. There are many unused codes but I figured that
they could be filled in as new ones came down the pipe
and I expect a number of new codes with their next releases.
I bent more than one ear at Denon about iPod, USB and
Net control from zone 2/3.

The codes you may need are can be found on the Denon-K
4.1 page.

I would like a copy of the Denon codes also. I have a AVR-65
Post 13 made on Thursday November 9, 2006 at 21:16
tgrugett
Select Member
Joined:
Posts:
August 2004
1,850
Check your mail!

I just sent the files to the last three posters.

T
Post 14 made on Tuesday December 26, 2006 at 17:32
Bruce Hartley
Founding Member
Joined:
Posts:
September 2001
397
Please could you send me the file.

Bruce@~nospam~s4pl.co.uk

remote ~nospam~

Ta
Post 15 made on Thursday February 1, 2007 at 23:55
Citation4444
Long Time Member
Joined:
Posts:
September 2005
17
I also would appreciate the codes for the Denon 4306. Thanks in advance.
Find in this thread:
Page 1 of 4


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse