|
|
|
The following page was printed from RemoteCentral.com:
Harmon Kardon codes for RTI
| |
|
Topic: | Harmon Kardon codes for RTI This thread has 14 replies. Displaying all posts. |
|
Post 1 made on Friday September 8, 2006 at 14:52 |
vbova27 Super Member |
Joined: Posts: | July 2006 2,987 |
|
|
Does anyone have IR codes for the HK AVR-635? I am surprised that RTI does not have these in the library.
Thanks
|
|
Post 2 made on Friday September 8, 2006 at 16:01 |
Springs Super Member |
Joined: Posts: | May 2002 3,238 |
|
|
Same codes as the X20s and X30s
|
|
OP | Post 3 made on Friday September 8, 2006 at 22:37 |
vbova27 Super Member |
Joined: Posts: | July 2006 2,987 |
|
|
On September 8, 2006 at 16:01, Springs said...
Same codes as the X20s and X30s Springs, what are the X20's and 30s? See no mention of these in the master.cml library...
|
|
Post 4 made on Saturday September 9, 2006 at 09:58 |
Springs Super Member |
Joined: Posts: | May 2002 3,238 |
|
|
Sorry.. reciever models ending in 20 25 30... 220 225 230 / 320 325 330 / Model years verses level of receiver.
The codes from the 7000 have worked for all the ones I have delt with. We stopped using Harmon as a go to line due to odd ball surround deafults with out discretes for modes. Been about a year seince I delt with a Harmon.
Out progression at work was... Onkyo dumped due to volitale memory Harmon dumped due to Q/C issues and having to manually pick surround modes. Marantz... Well we use Marantz every day now. Neither of the issues above... so far. Ohh and Discrets for most anything...
|
|
OP | Post 5 made on Saturday September 9, 2006 at 10:37 |
vbova27 Super Member |
Joined: Posts: | July 2006 2,987 |
|
|
Thanks, greatly appreciated. You wouldn't have anything for an ONKYO TX-8511 would you?
|
|
Post 6 made on Saturday September 9, 2006 at 10:45 |
Springs Super Member |
Joined: Posts: | May 2002 3,238 |
|
|
|
OP | Post 7 made on Saturday September 9, 2006 at 16:00 |
vbova27 Super Member |
Joined: Posts: | July 2006 2,987 |
|
|
On September 9, 2006 at 10:45, Springs said...
What do you need? Any IR codes that apply to that model would be great, it was not on RTI's master DB. Thanks
|
|
Post 8 made on Thursday November 2, 2006 at 01:03 |
pesci Senior Member |
Joined: Posts: | August 2006 1,211 |
|
|
I gotta problem w/ that too, my power off doesnt turn my avr 110 off, i can switch sources and inputs no problem. Can even poweron, but not power off!! Any help??????
|
|
|
Post 9 made on Thursday November 2, 2006 at 01:40 |
Glackowitz RC Moderator |
Joined: Posts: | May 2002 3,793 |
|
|
Do you have the Mega code list 12??
It has a AVR210 discrete code set that contains power on and power off
Those might work for you
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
Post 10 made on Thursday November 2, 2006 at 05:51 |
Springs Super Member |
Joined: Posts: | May 2002 3,238 |
|
|
The off command is right there on the provided remote.. do you have an IR PRO? I have the code in Pronto but it starts with a 9000...
|
|
Post 11 made on Thursday November 2, 2006 at 11:56 |
Tom Ciaramitaro Loyal Member |
Joined: Posts: | May 2002 7,967 |
|
|
On September 9, 2006 at 10:37, vbova27 said...
Thanks, greatly appreciated. You wouldn't have anything for an ONKYO TX-8511 would you? Don't believe you'll find discrete power, but inputs, volume, muting will work from almost any Onkyo receiver in your database.
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
Post 12 made on Thursday November 2, 2006 at 16:04 |
Springs Super Member |
Joined: Posts: | May 2002 3,238 |
|
|
Try these yet??? [Link: remotecentral.com]
Last edited by Springs
on November 22, 2007 10:05.
|
|
Post 13 made on Thursday November 22, 2007 at 08:21 |
gwright52 Lurking Member |
Joined: Posts: | November 2007 9 |
|
|
Regarding your statement of surround mode for H/K: "odd ball surround deafults with out discretes for modes". I am currently working with an AVR 247 and I have had many challenges with discrete and I/R commands that work. I have had to cut and paste. Almost there, but what can I use for Surround selection codes? Any advice would be appreciated.
|
|
Post 14 made on Thursday November 22, 2007 at 10:06 |
Springs Super Member |
Joined: Posts: | May 2002 3,238 |
|
|
It just toggels. That is why we moved to Marantz.
|
|
Post 15 made on Thursday November 22, 2007 at 11:49 |
gwright52 Lurking Member |
Joined: Posts: | November 2007 9 |
|
|
Thanks. I have to deal with that then. We'll be moving from H/K also
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|