Post 1 made on Friday July 28, 2000 at 17:45 |
Has anyone had any luck getting Pioneer Elite remotes to work with the T2? I can't get the T2 to see a signal. I know the manual says Elite Remotes won't work but I thought it may be worth a shot in asking for help on this forum.
Thanks.
|
|
OP | Post 2 made on Friday July 28, 2000 at 19:57 |
Which Elite piece is it. If it is one of the 1.125Mhz GUI TV's, most of the codes from pre-GUI will work.
Rob
|
|
OP | Post 3 made on Friday July 28, 2000 at 20:34 |
It is for the DVL-91 DVD/LD CombiPlayer. The remote model number is CU-DVO17. The T2 does not respond to a signal. I am not sure if this remote falls into the 1.125 category. I can control the DVL-91 with the DV-700 from the Lexicon site but it is missing the cursor controls. Those are the codes I want to program.
|
|
OP | Post 4 made on Saturday July 29, 2000 at 03:48 |
I got it to work! I had to aim it 90 degress to the T2 and then it got the signal. The cursor controls now work and I am happy. Woo Hoo!!!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.