|Post 1 made on Saturday March 27, 2021 at 12:34|
Maybe you had similar problem and you can help me out ?
I am more than beginner here but I am learning.
I have a Cyrus tuner which works only with remote and the latter is lost!
I bought a One for all URC-1210 (because I know it works with this model).
I have all RC-5 code for the tuner but I don't understand how to program it whit the remote.
I do understand that I have to press "magic/setup" button, it blinks twice and then...
But I missing the big picture...
I think I have to recreate one by one all functions and assign it to a button on the remote (because my tuner is not listed and pre-recorded on the one known by the URC-1210), correct ?
But how to start with ?
e.g. I want to assign the volume-up (code rc-5 = 16) to the volume touch of my RC.
Thanks a lot
|OP | Post 2 made on Saturday April 3, 2021 at 04:02|
for the one interested in, here is the answer.
I did it with the very valuable help of Rob (The Robman) without him it wouldn't have been possible!
I have corrected the EFC code for the Cyrus and wrote a tutorial avaiable for everyone. Just let me know how to share it if interested.
Here is the full OFC correted list:
IRC5EFC Cyrus Function
|OP | Post 3 made on Saturday April 3, 2021 at 04:06 |
Ok, the tabulation presention above are just a mess...
first 2-digit are IRC-5
then 5-digit are EFC code
and last is the Cyrus function
i.e the last line in the table is:
IRC5 EFC Cyrus Function
63 00018 Standby
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.