| Post 1 made on Wednesday March 1, 2000 at 03:28 |
Salman Historic Forum Post |
|
|
For my Sony VPL 600, I need a 15 pin D sub to 3 RCA (component video) cable. The projector can take both RGB or component video but only via its 15 pin VGA connector. Sony sell cable SMF-402 for this purpose are extremely expensive.
Any suggestions.
Salman.
|
|
| OP | Post 2 made on Wednesday March 1, 2000 at 12:02 |
spocko Historic Forum Post |
|
|
Hi Salman
pick up the yellow pages , look up wire & cable- electric. You should be able to find a custom cable manufacturer. The should be able to make the cable for about 40.00 bucks. I used Custom Cable Industries in Tampa
their # is 813-623-2232
spocko
|
|
| OP | Post 3 made on Wednesday March 1, 2000 at 13:58 |
Salman Historic Forum Post |
|
|
There are a number of people who can do it but lack the knowledge on pin out details. Everyone I spoke to wants to make a 15 pin to RGB which I do not need. The cable is also refered to as VGA/Video 3xRCA.
|
|
| OP | Post 4 made on Wednesday March 1, 2000 at 14:50 |
tweekman Historic Forum Post |
|
|
|
| OP | Post 5 made on Thursday March 2, 2000 at 09:56 |
spocko Historic Forum Post |
|
|
Hi Salman
Does'nt your manual for you projector show the pinouts
for the HD-15 in the back of the manual somewhere ???
Thats all the cable builder will need
also try the manufacturers site thay may have the tech info there
spocko
|
|
| OP | Post 6 made on Thursday March 2, 2000 at 14:21 |
Salman Historic Forum Post |
|
|
Spocko,
I FOUND IT; this must be the dummest thing I have done. The pinouts were right at the end b/f the french chapter. Somehow I always went to Specification page only and missed the Diagrams(next page) every time
Thanks a zillon.
Salman.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
