Your Universal Remote Control Center
RemoteCentral.com
Audio, Receivers & Speakers Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Denon AVR-1905 NO AUDIO HELP!!!!
This thread has 5 replies. Displaying all posts.
Post 1 made on Sunday January 9, 2005 at 15:00
ryounglaw
Lurking Member
Joined:
Posts:
January 2005
1
I recently bought the AVR-1905 and I am still learning the features. Yesterday, the audio on both the DVR Cable Box and the DVD Player stopped working. I do not know whether my girlfriend pushed a wrong button on the receiver or something happened to my monster optical cable. I do not believe anything is broken because I hooked my Xbox up to the RCA port and it will play thought the front speakers. Also the radio works just as before in surround sound, so I know its not my speakers.
The one thing I have noticed is that the DVD cable box is set AUTO but they constantly read analog. I thought they should read digital. All the digital optical cable are hooked up and are fully connected. The assignment is correct and I have already reset the microprocessor. I was hoping there is something I missed, like a button that is stopping the receiver from receiving optical signals. I just do know. If it was either the DVD or the cable box alone I would think it was the cables. But they both stopped working at the same time. Please help??
Ryan Young
Post 2 made on Monday January 10, 2005 at 12:38
Spiky
Founding Member
Joined:
Posts:
May 2001
2,288
Can you try using a different connection? Are there 2 digital outs on the DVDp, for instance? Or different digital inputs on the receiver? It could be the optical system died in the receiver, perhaps the coax is still working. You could also double check the analog just to make sure something is still working in the source boxes.
Post 3 made on Monday January 10, 2005 at 15:13
doodman
Long Time Member
Joined:
Posts:
January 2005
44
It is common in this unit to inadvertently hit the mode, analog, or ext in buttons on the very bottom of the remote. Press the mode button repeadetly until it is on "Auto" and this should fix the problem.
doodman
Post 4 made on Monday January 10, 2005 at 21:13
vwpower44
Super Member
Joined:
Posts:
August 2004
3,662
check the digital input assignment, make sure 5.1 input is not activate, make sure it is on the correct form of input. check main off button,

Mike
Stay Hungry, Stay Foolish...
Post 5 made on Tuesday January 11, 2005 at 00:05
geraldb
Long Time Member
Joined:
Posts:
June 2002
412
Or maybe the attorneys ate into the Toslink budget.
Post 6 made on Tuesday January 11, 2005 at 21:44
oex
Super Member
Joined:
Posts:
April 2004
4,177

my monster optical cable.

Hmmmmm.
Diplomacy is the art of saying hire a pro without actually saying hire a pro


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse