Post 1 made on Sunday December 26, 2004 at 22:46 |
Codesad Lurking Member |
Joined: Posts: | December 2004 1 |
|
|
I have a Kenwood VR-5090 with a rc-r0811 remote which is not the correct remote for this receiver. I am in need of the rc-r0913 to have the dual zone capabilities. I have already setup the second zone, speakers and volume control. But cannot get it to work. Preout to an amp and out to the speakers from the vr-5090. I also have a MX 3000 where i used the pre-programmed function to see if i would be able to enable my secondary zone. I can do this. MZ enable zone b, but I cannot raise volume or change input in the second zone. Please help ...!!!
|
|
Post 2 made on Monday December 27, 2004 at 09:04 |
PHSJason Advanced Member |
Joined: Posts: | December 2002 994 |
|
|
Try importing the codes from this .ccf into your mx-3000 and see if they help. These include the discretes for zone b. Keep in mind that multi-zone has to be on, and you have to turn the main system on to turn on the multi-zone. [Link: remotecentral.com]Jason
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.