I'm finishing off the installation of my remote speakers throughout my house using a zpr and two Elan Z-Series Amps. I want to be able to set the zones up on the ZPR without buying a RC68 or DragonDrop. I'm going to try the RS-232 port and the commands on Xantech's site, but does anyone know of a way to load the IR commands from the RC68 into another remote? I have a Lexicon 700T and an IRIQ\Harmon-Kardon remote and I'm pretty versed on programming the Lex. Better yet, if anyone out there has LexiDraw and a 500 or 700 and can capture the commands from the RC68 and email them to me, that would be way beyond cool. Also, I'm looking for 16VDC 300mA Adapter for an AV61 Xantech. I've emailed Xantech and no response. Sorry for the long post. Thanks!!