Your Universal Remote Control Center
RemoteCentral.com
Sony Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
RM-AV3100 and HR-24
This thread has 3 replies. Displaying all posts.
Post 1 made on Friday October 23, 2015 at 09:05
jim18655
Junior Member
Joined:
Posts:
October 2015
3
I have an old Sony remote that always worked with DTV DVR. New HR-24 and the remote won't work. The old remote that was used to program the Sony still operates the HR-24. I tried to re-program the Sony using "learn" and no luck. It seems to be sending additional commands to the DVR. Pushing the up arrow in the guide will move the highlighted guide up one line and then one more. Hitting "exit" will send a continuous string of commands. I can see the receiver light blinking and the HD mode changes because of the extra commands. Any ideas? I've been looking at newer remotes but I'd like to get this one working if possible.
Post 2 made on Friday October 23, 2015 at 15:02
edmund
Elite Member
Joined:
Posts:
April 2002
13,469
To have cleaner learns when using Directv remote to teach, turn off the extra signal sent with each command, on the White remote:


1. directv device
2. press and hold MUTE & SELECT for two blinks, release
3. enter 9 6 3
4. press CH Down

You'll notice the menu items change when using the remote on the directv receiver, to get the signal back, redo the above steps, but in the 4th step press CH UP
OP | Post 3 made on Friday October 23, 2015 at 16:13
jim18655
Junior Member
Joined:
Posts:
October 2015
3
Thanks for the reply. I tried your suggestion and no luck. The Sony operates a different model DTV DVR without problems. Some buttons work and some don't. The up and down arrows still send extra signals or corrupt signals. The DTV light on the receiver starts blinking fast and the guide runs away like a button is stuck. I've verified the remote isn't sending anything by looking at the IR LEDS on the front with a camera. The remote shuts down when I release the button. I've looked at the signals from both with an oscilloscope and don't see anything different. I beginning to wonder if the DVR is bad but three other DTV remotes work and one is about 12 years old.
OP | Post 4 made on Saturday October 24, 2015 at 09:24
jim18655
Junior Member
Joined:
Posts:
October 2015
3
Update.
Looks like following the Sony instructions was the problem. You can't hold the button down too long while "teaching" the code. The Sony will transmit the learned code as many times as it learns it. The HR-24 must have a buffer that stores received codes and executes them. If it get an 'up arrow' 50 times it executes it 50 times. Pressing another button interrupts the command. If I only press the DTV remote button for a short press the Sony learns and executes it properly.
I only have one other issue to fix now. The left arrow won't clear so I can program it. Pressing "delete+left arrow" locks up the remote and requires removing a battery to reset. I might have to clear the entire device menu to fix.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse