Your Universal Remote Control Center
Sony Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Programming RMT-B107A
This thread has 4 replies. Displaying all posts.
Post 1 made on Saturday June 19, 2010 at 11:28
Lurking Member
December 2007
I recently purchased a Sony blu-ray DVD player. It came with an RMT-B107A remote control. The remote has buttons to turn on/off the tv as well as the dvd player, and volume control. However, the instructions provided no means of connecting the remote to the tv. Can anyone advise how to achieve this? Thanks.
Post 2 made on Tuesday June 22, 2010 at 16:15
Ron Aronson
Super Member
June 2002
What is the model number of the DVD player?
Post 3 made on Wednesday June 23, 2010 at 10:58
Select Member
August 2009
Perhaps I misunderstand your question, but I believe that the TV section of the remote only operates Sony TVs, and is factory programmed to do that. I have a RMT-B104A, and it toggles power and brings up the input menu on the TV without any "connecting" on my part.

All Sony TVs use the same IR signals for Power, Volume, etc.
Post 4 made on Sunday July 11, 2010 at 15:13
Lurking Member
July 2010
Hi David. You may have figured this out already, but here's what I did to configure my remote to work with my non sony tv.

Visit this part of sony's support site and select your television brand in the drop down menu:


This gives you the code you'll need to enter in the next step.

Then, do as the instructions say. Hold down small green button for *TV* on/off. (Next to the input button).

Wait a bit, then enter the number code using the NUMBER PAD. (Sony's site tells you to use the arrow keys -- I don't know which tv sets this applies to, I had to use the number pads.)

I never saw anything come up on the tv screen, there was no prompt the enter the code, no confirmation. Just had to hold down the on/off button for a bit and then entered in the code as i continued to hold down the on/off button. It did work, however, and I can now control some functions of the television set with my RMT-B107A remote.
Post 5 made on Wednesday December 7, 2011 at 08:06
Lurking Member
December 2011
Your directions were spot on! I have an RCA TV, and it worked! Thanks for posting!

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse