| Post 1 made on Thursday December 22, 2005 at 14:27 |
Robert1556 Lurking Member |
Joined:
Posts: | December 2005
2 |
|
|
I'm attempting to configure "selecting a channel with a single key", for my HD channels I must input a point (.), example 114.1. Any ideas on how to do this with a AV3000
Robert1556
|
|
| Post 2 made on Thursday December 22, 2005 at 23:29 |
cb1 Select Member |
Joined:
Posts: | September 2002
1,663 |
|
|
I used the +100 button(next to the 0) I learned the . from the original.
The "key macro" only acceps four button presses. 114.1 is five, maybe you can do 114 then just channel up. Or , on an unused page use the a two button key macro then use that as one of your four step channel macros.
four step key macro would be as follows:
1
1
4.
1
cb1
|
why have a nice system if you cant operate it, program the remote the right way the FIRST time! |
|
| OP | Post 3 made on Saturday December 24, 2005 at 10:16 |
Robert1556 Lurking Member |
Joined:
Posts: | December 2005
2 |
|
|
Thanks... I will give it a try.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
